INSTALLATION INSTRUCTIONS
Installing Lukeke birds, bees and flowers
When installing a Lukeke bird, bee or flower please consider the surface - drywall, concrete or wood etc. as each wall will require a different type of anchor.
Drywall / GIB
After installing your anchor, screw the work into the wall. Be mindful to not over-tighten as this can damage the work.
Masonry
After installing your anchor, screw the bird into the wall. Be mindful to not over-tighten as this can damage the work.
Wood
Drill a pilot hole no larger than the diameter of the screw. Screw the bird into the wall. Be mindful to not over-tighten as this can damage the work.
If in doubt, please contact luke@lukejacomb.com or your local art installer.
Please see our installation video below, or talk to us about a Design Consultation.
Installing Lukeke butterflies
Drill two 1mm holes into the wall to the width of how far apart you'd like the butterflies antennae and thread both the antennae as far as you can into the drill holes. If the antennae are too long for the depth of the wall, use wire cutters to trim the antenna evenly. Please see our installation video below.